BITUTHENE® Edgeguard Tape

Specially formulated, solvent resistant overbanding tape for Bituthene applications in chemically contaminated ground

Product Description

Bituthene® Edgeguard® Tape is a specially formulated tape designed for applications where resistance to hydrocarbon contaminated soil is required. Bituthene® Edgeguard® Tape is constructed of a 2 mil (0.05 mm) polyester film with a pressure sensitive, solvent resistant acrylic adhesive. The adhesive bond increases with age.

Uses

Bituthene® Edgeguard® Tape is recommended for use over Bituthene® Membrane edges to protect the adhesive from prolonged exposure to hydrocarbon contaminated soil.

For guidelines on the use of Bituthene® Membranes in contaminated ground, please refer to Technical Letter 4, available at gcpat.com or contact GCP Technical Service.

Product Advantages

  • Solvent resistant—protects Bituthene® compound from prolonged exposure to organic or fuel oils and solvents in the ground

  • System compatibility—engineered specifically for use with Bituthene® membranes

  • Self-adhered—easy to use; adhesive bond increases with age

Application

On vertical and horizontal applications, place a continuous strip of tape centered on all membrane sides and end lap edges. Membrane surface must be clean and dry. In cooler temperatures, gently heat tape to enhance adhesion characteristics. Roll tape application with hand roller to maximize adhesion. Inspect application thoroughly, patch fishmouths with additional strips of tape as necessary to provide a tight seal.

Solvent Resistance Performance Test

Bituthene® Edgeguard® Tape is applied to an aluminum substrate 72 hours prior to a 72 hour immersion in the following environments: distilled water, lubricating oil, hydraulic oil, motor oil, diesel fuel, kerosene and mineral spirits. In all of the above environments the adhesion is 3 lbs/in. (53 N/100 mm).

Safety, Storage and Handling Information

Bituthene® products must be handled properly. Vapors from solvent-based primers and mastic are harmful and flammable.For these products, the best available information on safe handling, storage, personal protection, health and environmental considerations has been gathered. SDS (Safety Data Sheet) are available and users should acquaint themselves with this information. Carefully read detailed precaution statements on product labels and the SDS before use.

Supply

BITUTHENE® EDGEGUARD TAPE PROPERTY VALUE
Roll size 50 mm x 66 m (2 in. x 216 ft)
Packaging 24 rolls/carton
Weight 8 kg (16 lbs)/carton
Coverage 1 roll per 3 rolls of Bituthene® membrane

Equipment by others: Utility knife, hand roller

Physical Properties

PROPERTY TYPICAL VALUE TEST METHOD
Thickness 0.002 in. (0.05 mm) nominal ASTM D3652
Tensile strength 20 lbs/in. (350 N/100 mm) minimum ASTM D3759
Elongation at break 70% minimum ASTM D3759
Adhesion to steel 48 oz/in. (53 N/100 mm) minimum ASTM D3300
Puncture resistance 50 lbs (222 N) minimum ASTM E154

 

 

ca.gcpat.com | North America customer service: 1-877-4AD-MIX (1-877-423-6491)

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

Bituthene and Edgeguard are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.

GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.

In Canada, 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.

Ce document est à jour seulement à la date de la dernière mise à jour indiquée ci-dessous et n'est valide que pour une utilisation au Canada. Il est important que vous consultiez toujours les informations actuellement disponibles sur l'URL ci-dessous pour fournir les informations les plus récentes sur le produit au moment de l'utilisation. Des documents supplémentaires tels que les manuels de l'entrepreneur, les bulletins techniques, les dessins détaillés et les recommandations détaillées ainsi que d'autres documents pertinents sont également disponibles sur www.ca.gcpat.com. Les informations trouvées sur d'autres sites Web ne doivent pas être utilisées, car elles peuvent ne pas être à jour ou applicables aux conditions de votre site et nous déclinons toute responsabilité quant à leur contenu. S'il y a des conflits ou si vous avez besoin de plus d'informations, veuillez contacter le service client de GCP.

Last Updated: 2019-05-30

https://ca.gcpat.com/en/solutions/products/bituthene-post-applied-waterproofing-edgeguard-tape