PIERI® Duro-Tard™ Surface Retarder

In-form surface retarder

DownloadPdf
Add

Product Description

PIERI® Duro-Tard™ is an in-form surface retarder for the most difficult of applications having a placement time of up to 90+ minutes. Abrasion resistance for vertical pours up to 12 feet. Heat resistance up to 150°F (65°C), a coverage rate 250-300 ft2/gal (6.1-7.4 m2/L). Available in nine depths of etch, each color and number coded. A test panel is recommended to simulating job conditions should be poured for proper grade selection.

Area of Application

Excellent for large or intricate (lengthy placement) architectural precast or for high vertical poured-in-place concrete (e.g. bridge work). For use with steel, concrete or plywood forms. Note that plywood forms should be sealed before use (PIERI® 245 Form Seal™).

Directions

For architectural precast (optional for poured-in-place), apply preparation coat of PIERI® VMR with brush or roller at a rate of 400–500 ft2/gal (9.8-12.3m2L). Allow to dry thoroughly, usually 10–15 minutes depending on temperature, humidity and ventilation.

Thoroughly mix PIERI® Duro-Tard™ surface retarder before using and apply a single coat (or two light coats) using brush, roller or airless sprayer at a total rate of 250-300 ft2/gal (6.1-7.4 m2/L); coat thickness (3–4 mils). Clean up with Xylene. Allow retarder to dry thoroughly, usually 20–30 minutes, before pouring concrete. Wash off at the end of the curing cycle with high-pressure water.

Caution: When steam curing, bring the temperature up gradually (not to exceed 150°F) to allow the surface retarder to react properly with concrete. Note: If steam is to be used, it should also be used with the test panel to ensure proper grade selection.

Technical Data

  • Solvent based
  • Flash point: 40°F (4°C)
  • Heat resistance: 150°F (65°C)

Shelf Life and Storage

Two years from manufacturing date when stored in closed original container.

Packaging

Five gallon pails.

Safety

Product is highly flammable. Refer to SDS (Safety Data Sheet) prior to use. Keep away from heat, sparks and open flame. Keep away from children. Wear appropriate chemical resistant apron, gloves and other impervious protective gear; ear; use goggles/face shield. Use respirator for spray application.

Shipping Classification

Flammable Liquids NOS contains solvent naphtha (petroleum), light aliphatic, methanol (Methyl Alcohol), 3, UN1993, PG: II, Flammable Liquid.

ca.gcpat.com | North America customer service: 1-877-4AD-MIX (1-877-423-6491)

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

PIERI is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2017 GCP Applied Technologies Inc.

All rights reserved.

In Canada, 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6


GCP Applied Technologies Inc., 2325 Lakeview Parkway, Suite 450, Alpharetta, GA 30009, USA
GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the Canada. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2022-11-17

https://ca.gcpat.com/en/solutions/products/pieri-architectural-precast-portfolio/pieri-duro-tard-surface-retarder