PREPRUFE® Membrane Pre-Applied Waterproofing Solutions
High-performance, fully adhered, pre-applied waterproofing system for critical below-grade applications.
Challenges of below-grade waterproofing.
The PREPRUFE® Waterproofing Membrane system utilizes GCP Applied Technologies’ (“GCP”) Advanced Bond Technology to create a continuous, integral adhesive bond to poured in place concrete. Leaks from groundwater, storm water runoff or irrigation water may impact the foundation of any building that's improperly waterproofed — and when concrete is involved, there any number of ways that water can travel into and around a structure.
- Water can come up through the seams of a poorly designed or improperly installed waterproofing membrane
- Job site conditions such as dust can spoil the adhesion of a membrane to concrete and prevent a system from performing as designed
- Imperfections, voids and cracks in concrete can create a pathway for water to migrate in and around a structure.
To manage the risks outlined above and meet the challenges of below-grade construction, a robust, high-performing and easily installed waterproofing system is required.
Get in touch with a waterproofing expert!
PREPRUFE® Product Documents
Products
- Product Name
- Description
- Key Benefits
- Applications Type
PREPRUFE® 200 is a composite sheet membrane comprised of a robust HDPE film, an aggressive pressure-sensitive adhesive and a weather resistant coating. Using patented Advanced Bond Technology, PREPRUFE® 200 Membrane provides a continuous seal that resists water ingress and migration between the membrane and the structure.
- Prevents water migration
- Fast and easy installation
- Avoids delays
- Excellent vapor barrier
It can be applied either horizontally to smooth prepared concrete, well-rolled and compacted sand or compacted crushed stone blinding; or vertically to permanent formwork or adjoining structures.
PREPRUFE®250 pre-applied waterproofing membrane is a unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating.
- Forms a continuous adhesive bond to concrete poured against it
- Specifically designed to prevent water migration
- Continuous bond to poured concrete means PREPRUFE® 250 membrane is unaffected by ground settlement
PREPRUFE® 250 is intended for low hydrostatic pressure or intermittent water conditions. Applications include construction such as garages, plant rooms and utility grade basements.
PREPRUFE® 275 membrane is a composite sheet comprised of an HDPE film, an aggressive pressure sensitive adhesive and a weather resistant protective coating.
- Durable system designed specifically to withstand the force of shotcrete placement.
- The unique continuous and integral bond to the structure, is specifically designed to reduce lateral water migration between the membrane and the shotcrete.
PREPRUFE® Low Temperature Membranes (300LT and 160LT) are proprietary composite sheets comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating. Designed with Advanced Bond Technology™, PREPRUFE® 300LT & 160LT membranes form a proprietary, integral bond to poured concrete, designed to prevent lateral migration of water while providing a robust barrier to water, moisture and gas penetration.
- Forms a continuous adhesive bond to concrete poured against it specifcally designed to prevent water migration Continuous Direct bond to poured concrete means PREPRUFE® 300LT & 160LT membranes are unaffected by ground settlement
- Can be placed directly over properly prepared compacted soil
- Does not activate prematurely during construction
- Fully adhered watertight laps and detailing
PREPRUFE® 300LT Membrane is specifically designed to be installed over well compacted soils prepared consistent with details in the most current published product data sheets. PREPRUFE® 300LT membrane can be applied either horizontally or vertically to smooth prepared concrete, carton forms or well rolled and compacted earth or crushed stone substrate. For vertical form-work applications refer to the most current published application literature.
PREPRUFE® 160LT Membrane is specifically designed to be installed in vertical applications over soils prepared consistent with details in the most current published product data sheets. For vertical form-work applications refer to the most current published application literature. PREPRUFE® 160LT Membrane is not for horizontal use.
PREPRUFE® 300R & 160R membranes are proprietary composite sheets comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating. Designed with Advanced Bond Technology™, PREPRUFE® 300R & 160R membranes form a proprietary, integral bond to poured concrete, designed to prevent lateral migration of water while providing a robust barrier to water, moisture and gas penetration.
- Forms a continuous adhesive bond to concrete poured against it specifically designed to prevent water migration
- Continuous bond to poured concrete means PREPRUFE® 300R & 160R membranes are unaffected by ground settlement
- Can be placed directly over properly prepared compacted soil
- Does not activate prematurely during construction
PREPRUFE® 300R Membrane is specifically designed to be installed over well compacted soils prepared consistent with details in the most current published product data sheets. PREPRUFE® 300R membrane can be applied either horizontally or vertically to smooth prepared concrete, carton forms or well rolled and compacted earth or crushed stone substrate. For vertical form-work applications refer to the most current published application literature.
PREPRUFE® 160R Membrane is specifically designed to be installed in vertical applications over soils prepared consistent with details in the most current published product data sheets. For vertical form-work applications refer to the most current published application literature. PREPRUFE® 160R Membrane is not for horizontal use.
PREPRUFE® 300R Plus & 160R Plus membranes are unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating.
- Forms a unique continuous adhesive bond
- Fully-adhered adhesive to adhesive watertight ZipLaps
- Provides a barrier to water, moisture and gas
- Easy roll/kick out installation
- PREPRUFE® 300R Plus membranes can be applied horizontally to smooth prepared concrete, carton forms or well rolled and compacted earth or crushed stone substrate
- PREPRUFE® 300R Plus or 160R Plus membranes can be applied vertically to permanent formwork or adjoining structures
PREPRUFE® 300R Plus LT & 160R Plus LT pre applied waterproofing membranes are unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protective coating.
- The unique continuous adhesive bond to concrete poured against it prevents water migration and makes it unaffected by ground settlement beneath slabs.
- Designed with fully adhered adhesive to adhesive watertight ZipLap™ seams and easy to execute detailing.
- Provides a barrier to water, moisture and gas physically isolating the structure from the surrounding substrate.
- PREPRUFE® 300R Plus LT can be applied horizontally to smooth prepared concrete, carton forms or well rolled and compacted earth or crushed stone substrate
- PREPRUFE® 300R Plus LT or 160R Plus LT can be applied vertically to permanent formwork or adjoining structures
PREPRUFE® 400T membrane is a unique composite sheet comprised of a thick polyethylene film, an aggressive pressure sensitive adhesive and a protective coating.
- Fully-adhered technology—provides an intimate seal to the structure
- Micro-compartmentalized system—prevents lateral water migration between the waterproofing and the structure
- Solutions for all tunnel types—used for drilland-blast, bored and cut-and-cover tunneling applications
PREPRUFE® 800PA is a cold-applied, self-adhesive waterproofing membrane, composed of a reinforced cross-laminated HDPE film, and a synthetic non-bituminous adhesive. PREPRUFE® 800PA incorporates the PREPRUFE® Advanced Bond Technology™.
- Non-bituminous
- Adhesion
- Productivity
- Fully bonded
- Elastomeric
- Superior performance
- Water and vapor barrier
- Gas resistant
- Basement walls of all basement grades to BS 8102: 2009
- Below-ground car parks
- Underground RC reservoirs and tanks
- Industrial plants
- Radon and methane gas protection
- Protection from water, damp and gas of critical substructures
Preprufe® SCS is a unique blindside waterproofing system specifically developed to provide a high performance waterproofing solution for shotcrete foundation walls.
- Durable system designed specifically to withstand the force of shotcrete placement
- Post-injected grout fills and seals, providing ultimate waterproofing protection
- Aggressive bond to shotcrete resists lateral water migration
- Excellent resistance to hydrostatic pressure
Shotcrete foundation walls
Documents
- Accessory Name
- Description
- Key Benefits
- Applications Type
PREPRUFE® Detail Tape is a specially formulated, two-sided, highly aggressive tape. It is a 2 in (50 mm) wide x 50 ft (15 m) long self-adhesive tape with a release liner.
- Detailing accessory to the PREPRUFE® and PREPRUFE® SCS Systems
- Adhering Hydroduct® drainage composites and insulation boards to waterproofing membranes
Preprufe® Grout CEM 100 is a high strength, cementitious, non-shrink grout for re-profiling of pile heads prior to the application of Preprufe® Grout EG 75 or for concrete substrate repairs. When used with Preprufe® Grout EG 75, continuity of Preprufe® waterproofing systems at pile heads and similar structural penetrations is achieved.
- Compatible with Preprufe® Grout EG 75
- Low permeability
- Shrinkage compensated (non-shrink)
- High bond to concrete substrates
- Rapid strength gain
- Re-profiling of pile heads before the application of Preprufe® Grout EG 75
- Re-profiling of structural penetrations through Preprufe® sheet waterproofing systems before the application of Preprufe® Grout EG 75
Preprufe® Grout EG 75 is a high performance, solvent free, impermeable epoxy grout for maintaining continuity of Preprufe® waterproofing systems at pile heads and similar structural penetrations. The product comprises of a base epoxy resin, an epoxy hardener and graded mineral aggregates. The three components are supplied pre-measured for easy on site mixing at the correct ratio.
- Water resistant adhesion to all products in the Preprufe sheet waterproofing system
- Impermeable
- High bond to substrate
- Rapid strength gain
- High compressive, flexural and tensile strengths
- Waterproofing of pileheads and pilecaps
- Waterproofing of structural penetrations through Preprufe® waterproofing systems
- Recommended thickness range 1/2" (13mm) - 3" (75 mm)
A caulk-applied hydro-swelling sealant designed as a water stop for use around penetrations and in both horizontal and vertical construction joints.
- Solvent free
- >200% expansion
- Can be applied to damp surfaces
- Strong adhesion
- Ease of application
- As a water stop around pipe penetrations, rebar, utility conduits and other penetrations
- Horizontal and vertical construction joints in concrete surfaces
- As a detailing accessory to the Preprufe® Waterproofing System
Preprufe® Tape and Preprufe® CJ Tape are specially formulated two sided, reinforced pressure-sensitive tapes. These tapes are constructed with a highly aggressive adhesive which is designed to adhere to penetrations, protrusions and GCP waterproofing membranes.
- Detail areas including end laps, penetrations and repairs to Preprufe waterproofing systems
- Construction joints
The Preprufe® Tieback Cover is a specially designed, two-part cover used to maintain waterproofing integrity at soil retention tieback heads. The Preprufe® Tieback Cover consists of a base and cover, and is assembled on site to provide a simple and quick waterproofing detailing aid used with the Preprufe® system.
- Prevents water migration
- Fully-adhered watertight laps using Preprufe Tape
- Simple and quick to install
- Easy to inspect
The Preprufe Tieback Cover can be installed over cable and rod type tieback heads.
Protect your structure with a proven waterproofing membrane
Comprised of a robust HDPE film, pressure-sensitive adhesive and protective coating, PREPRUFE® Membranes form a robust, permanent and aggressive adhesive bond with any concrete slab. PREPRUFE® Membrane products are specifically designed to perform in critical applications and incorporate Advanced Bond Technology™ to ensure fully adhered and long-lasting product performance. This technology allows PREPRUFE® Membranes to form a continuous unbroken seal with the concrete for the design life of the project.
A proven, reliable waterproofing solution for critical applications
PREPRUFE® Waterproofing Membranes Advanced Bond Technology™ creates a continuous, integral adhesive bond to poured concrete. This adhesive seal is specifically designed to prevent the lateral migration of water into and around the structure and provides performance for the lifetime of the structure. Standard ASTM hydrostatic head testing demonstrates that in the case of a puncture ,this fully bonded membrane can successfully prevent water from migrating between the membrane and concrete, greatly reducing the risk of catastrophic waterproofing failure. Independent testing and a 25+ year track record has proven that PREPRUFE® Waterproofing Membranes can resist lateral water migration at extremely high pressure and has been successfully tested at 70 meters of hydrostatic head pressure. For this reason, PREPRUFE® Waterproofing Membrane systems have been proven to perform globally in the world's most critical applications.
Contractor friendly, straightforward installation to ensure performance and accelerate project schedules
Many systems in the market today require the use of welding or mechanically fastened laps. These installation requirements require a skilled installer, introduce risk to the installation and take time, effort and expertise. These methods requires a large crew and specialised equipment in addition to creating the potential for dangerous and unpleasant site conditions such as odour. In addition to the logistical challenges, these processes tend to be finicky— common jobsite challenges such as dust and moisture can easily result in incorrectly completed laps and details, both of which may result in expensive and costly long-term consequences.
By contrast, PREPRUFE® PLUS Membranes can be applied with a small crew and requires no special equipment for installation. Membrane installation is simple: a "kick-out" design allows workers to unroll a sheet in seconds. With PREPRUFE® R Plus Membranes, the dual adhesive ZIPLAP™ seam allows sheets to bond to one another easily, and is designed to resist common nuisance conditions onsite - dust, debris and moisture.
World-quality waterproofing
With applications on mega projects such as the Alaskan Viaduct, the largest bored tunnel on Earth, PREPRUFE® Waterproofing Membranes have been proven the world over in critical applications. Over the last 25 years, builders have installed more than 650 million square feet of PREPRUFE® Waterproofing Membranes. For below-grade applications—there’s PREPRUFE® Membranes have earned the reputation as the most reliable and trusted brand in waterproofing. For more information on how PREPRUFE® Waterproofing Membranes can benefit your project, contact GCP today.

Preprufe® Solved $4 Billion Transport Infrastructure Challenges

Contractor References
Find application instructions, installation details and detailed drawings.
Distributor Locator
Looking for a distributor that supplies air barriers, flashing, weather resistive barriers, roofing underlayments, waterproofing, injection materials or flooring?

Product Warranty
Click on the login to access the site with your username and password. Please add GCPAT\ (including the slash) in front of your user name when entering user name. If you need assistance, please contact Denise White at: 617 498-4555 or Denise.I.White@gcpat.com