Daracem® 100 is an aqueous solution of chemical dispersants combined with other chemicals which increase its beneficial effects on the quality and plasticity of a concrete mix.
Daracem 100 is the first high-range water reducer specially formulated for extended slump life. Conventional superplasticizers normally provide only 25 to 45 minutes of slump increase before the concrete begins to lose workability. Daracem 100, however, extends the time span of the slump increase up to twice as long or longer. One gallon of Daracem 100 weighs approximately 10 lbs (1.2 kg/L).
Daracem 100 provides improved slump retention in flowable concrete. It is ideal for low water/cement ratio concrete designed for high early compressive and flexural strengths with exceptional workability and flow characteristics. Because of its unique ability to draw maximum effect from the cement content of a mix, it frequently gives performance with a Type I cement comparable to that of a Type III cement.
Daracem 100 helps to solve difficult placeability problems such as dense rebar networks or constricted forms and job conditions requiring that the concrete be transported or pumped for long distances. A Daracem 100 mix flows easily into forms and around reinforcing steel. Even at high slump, the concrete consolidates well without segregation.
Daracem 100 can be added at variable addition rates to suit job requirements. The normal dosage range is 5 to 20 oz/100 lbs (325 to 1300 mL/100 kg) of cement. In the lower range, Daracem 100 meets the requirements for an ASTM C494 Type F water-reducing, high-range admixture and at the upper range for a Type G water-reducing, high-range and retarding admixture. Note that when used as a Type G admixture, concrete set times will increase. Varying addition rates may give added slump variances to match placement needs. Should job conditions require more than recommended addition rates, please consult your GCP representative.
Daracem 100 is compatible with most GCP admixtures as long as they are added separately to the concrete mix, usually through the water holding tank discharge line. However, Daracem 100 is not recommended for use in concrete containing ADVA® superplasticizers or polycarboxylate-based mid-range water reducers. In general, it is recommended that Daracem 100 be added to the concrete mix near the end of the batch sequence for optimum performance. Different sequencing may be used if local testing shows better performance. Please see GCP Technical Bulletin TB-0110, Admixture Dispenser Discharge Line Location and Sequencing for Concrete Batching Operations for further recommendations.
Pretesting of the concrete mix should be performed before use, as conditions and materials change in order to assure compatibility, and to optimize dosage rates, addition times in the batch sequencing and concrete performance. For concrete that requires air entrainment, the use of an ASTM C260 air-entraining agent (such as Daravair® or Darex® II AEA) is recommended to provide suitable air void parameters for freeze-thaw resistance. Darex AEA is not recommended.
Daracem 100 is available in bulk, delivered by metered tank trucks, totes and drums.
Daracem 100 will begin to freeze at 32 °F (0 °C) but will reconstitute to full strength after thawing and agitation. In storage and for trouble-free dispensing, Daracem 100 should be maintained at temperatures above 40 °F (4 °C).
A complete line of accurate, automatic dispensing equipment is available.
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
Daracem, ADVA, Daravair and Darex are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Suite 475, Alpharetta, GA 30009, USA
GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the Canada. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2024-06-21
https://ca.gcpat.com/fr-ca/solutions/products/daracem-100