Membrane d’étanchéité pré‑appliquée PREPRUFE®
Un système d'étanchéité pré-appliqué haute performance, entièrement adhéré pour les applications critiques au dessous du niveaux du sol.
Preprufe® technologie du GCP Advanced Bond pour créer un collage continu, intégrale et permanente au béton. Les fuites d’eau souterraine, le ruissellement de l’eau de pluie ou d’irrigation peuvent avoir une incidence sur la fondation d’un bâtiment mal imperméabilisé et quand on parle de béton, il y autant une infinité de manières dont celle‑ci peut se propager à l'intérieur et autour d’une structure.
- L’eau peut traverser les joints d’une membrane d'étanchéité mal conçue ou mal installée.
- Des conditions sur site tels que la poussière peuvent nuire à l’adhérence de la membrane au béton et empêcher un système de fonctionner tel que prévu
- Les imperfections, les cavités et les fissures dans le béton peuvent créer une voie pour la migration de l’eau dans et autour d’une structure.
Pour gérer ces risques et relever les défis de la construction en souterrain, un système robuste et performant, facile à installer, est nécessaire.
PREPRUFE® Brochure
Product Name | |
PREPRUFE® Plus Membrane infographic |
PDF
|
PREPRUFE® Product Brochure |
PDF
|
Product Name | Fiche de données produit | Spécifications guides | FDS/FTSS |
PREPRUFE® 200 Membrane |
Fiche de données produit
|
Spécifications guides
|
|
PREPRUFE® 250 Membrane Data Sheet |
Fiche de données produit
|
Spécifications guides
|
FDS/FTSS
|
PREPRUFE® 275 Membrane |
Fiche de données produit
|
Spécifications guides
|
FDS/FTSS
|
PREPRUFE® 300R Plus & 160R Plus Membranes Data Sheet |
Fiche de données produit
|
Spécifications guides
|
FDS/FTSS
|
PREPRUFE® 300R Plus LT & 160R Plus LT Membranes Data Sheet |
Fiche de données produit
|
Spécifications guides
|
FDS/FTSS
|
PREPRUFE® 800PA Membrane |
Fiche de données produit
|
Spécifications guides
|
|
PREPRUFE® 800XP Composite Membrane |
Fiche de données produit
|
Spécifications guides
|
FDS/FTSS
|
PREPRUFE® Detail Tape |
Fiche de données produit
|
FDS/FTSS
|
|
PREPRUFE® Grout EG 75 |
Fiche de données produit
|
||
PREPRUFE® Hydrophilic Sealant |
Fiche de données produit
|
FDS/FTSS
|
|
PREPRUFE® SCS |
Fiche de données produit
|
Spécifications guides
|
|
PREPRUFE® Tape and PREPRUFE® CJ Tape |
Fiche de données produit
|
FDS/FTSS
|
|
PREPRUFE® Tieback Cover |
Fiche de données produit
|
Safety Data Sheets
Product Name | |
PREPRUFE® 250 Safety Data Sheet |
PDF
|
PREPRUFE® 275 Membrane Safety Data Sheet |
PDF
|
PREPRUFE® 300R Plus & 160R Plus Membranes Safety Data Sheets |
PDF
|
PREPRUFE® 300R Plus LT & 160R Plus LT Membranes Safety Data Sheets |
PDF
|
PREPRUFE® 800XP Safety Data sheet |
PDF
|
PREPRUFE® CJ Tape LT Safety Data Sheet |
PDF
|
PREPRUFE® Detail Tape Safety Data Sheet |
PDF
|
PREPRUFE® Grout EG75 Base, Hardener & Filler Safety Data Sheet |
PDF
|
PREPRUFE® Hydrophilic Sealant Safety Data Sheet |
PDF
|
PREPRUFE® Membranes (All Products) Safety Data Sheet |
PDF
|
PREPRUFE® SCS Hydrophilic Grout Part A & B Activator Safety Data Sheet |
PDF
|
PREPRUFE® SCS Hydrophilic Grout Part A & B Safety Data Sheet |
PDF
|
PREPRUFE® SCS Port Patch Safety Data Sheet |
PDF
|
PREPRUFE® Tapes (All Products) Safety Data Sheet |
PDF
|
Detail Drawings
Product Name | DWG | |
800PA - 001 - Foundation Wall Floor Slab at Footing Level Detail Drawing |
PDF
|
|
800PA - 002 - Foundation Wall Floor Slab at Footing Level Detail Drawing |
PDF
|
|
800PA - 003 - Foundation Wall Elevated Floor Slab Detail Drawing |
PDF
|
|
800PA - 004 - Foundation Wall Structural Slab Detail Drawings |
PDF
|
|
800PA - 005 - Foundation Wall Flush to Structural Slab Detail Drawings |
PDF
|
|
800PA - 006 - Plaza Deck to Wall Tie-in Detail Drawing |
PDF
|
|
800PA - 007 - Penetration Detail Drawing |
PDF
|
|
PRE-009-A — Blind Side Wall to Slab Tie-in (Option A) Detail Drawing |
DWG
|
PDF
|
PRE-009-B — Blind Side Wall to Slab Tie-in (Option B) Detail Drawing |
DWG
|
PDF
|
PRE-010 — Below Slab Drainage with HYDRODUCT® Connector Tee Detail Drawing |
DWG
|
PDF
|
PRE-031 — End Lap Detail for Wall or Slab (Option 1) Detail Drawing |
DWG
|
PDF
|
PRE-032 — End Lap Detail for Wall or Slab (Option 2) Detail Drawing |
DWG
|
PDF
|
PRE-033 — Inside Corner - Custom Formed Detail Drawing |
DWG
|
PDF
|
PRE-034 — Pipe Penetration for Wall or Slab Detail Drawing |
DWG
|
PDF
|
PRE-035 — Straight Edge Penetration Detail Drawing |
DWG
|
PDF
|
PRE-036 — Outside Corner - Custom Formed Detail Drawing |
DWG
|
PDF
|
PRE-037 — Column (Option1) Detail Drawing |
DWG
|
PDF
|
PRE-038 — Column (Option2) Detail Drawing |
DWG
|
PDF
|
PRE-039 — Wall Termination for Elevated Slabs Detail Drawing |
DWG
|
PDF
|
PRE-040 — Wall Termination to BITUTHENE® Membrane Detail Drawing |
DWG
|
PDF
|
PRE-041 — Wall Termination to PROCOR® Membrane Detail Drawing |
DWG
|
PDF
|
PRE-042-A — Construction Joint (Option A) Detail Drawing |
DWG
|
PDF
|
PRE-042-B — Construction Joint (Option B) Detail Drawing |
DWG
|
PDF
|
PRE-043 — Grade Beam Pile Cap (Option 1) Detail Drawing |
DWG
|
PDF
|
PRE-044 — Grade Beam Pile Cap (Option 2) Detail Drawing |
DWG
|
PDF
|
PRE-045 — Tie into BITUTHENE® Wall Waterproofing Detail Drawing |
DWG
|
PDF
|
PRE-046 — Tieback Cover Detail Drawing |
DWG
|
PDF
|
PRE-047 — Soil Retention Tieback Custom Box Cover Detail Drawing |
DWG
|
PDF
|
PRE-048 — Top Termination and End Lap Detail Drawing |
DWG
|
PDF
|
PRE-049 — Rebar, Dowel and All-thread Penetration Detail Drawing |
DWG
|
PDF
|
PRE-059 — Side Lap Detail Drawing |
DWG
|
PDF
|
PRE-060 — Temporary Protection During Construction Sequencing Detail Drawing |
DWG
|
PDF
|
PRE-061 — BITUTHENE® Tie-in with Elevated Slab Detail Drawing |
DWG
|
PDF
|
SCS-001 — Side Lap Detail Drawing |
DWG
|
PDF
|
SCS-002 — End Lap Detail Drawing |
DWG
|
PDF
|
SCS-003 — Tie-back Cover Detail Drawing |
DWG
|
PDF
|
SCS-004 — Penetration Detail Drawing |
DWG
|
PDF
|
SCS-005 — Vertical Wall Control/Contraction Joint Detail Drawing |
DWG
|
PDF
|
SCS-006 — Tie-in to BITUTHENE® Wall Detail Drawing |
DWG
|
PDF
|
SCS-007 — Tie-in to BITUTHENE® Deck Detail Drawing |
DWG
|
PDF
|
SCS-008 — Side Termination Detail Drawing |
DWG
|
PDF
|
SCS-009 — Base of Wall - Elevation Detail Drawing |
DWG
|
PDF
|
SCS-010 — System Cross Section Detail Drawing |
DWG
|
PDF
|
SCS-011-A — Base of Wall Tie-in to Slab (Option A) Detail Drawing |
DWG
|
PDF
|
SCS-011-B — Base of Wall Tie-in to Slab (Option B) Detail Drawing |
DWG
|
PDF
|
SCS-012 — Vertical to Horizontal Lap Detail Drawing |
DWG
|
PDF
|
SCS-013 — Top Termination Detail - Accessible Detail Drawing |
DWG
|
PDF
|
SCS-014 — Top Termination Detail - Inaccessible Detail Drawing |
DWG
|
PDF
|
SCS-015 — Inside Corner Detail Drawing |
DWG
|
PDF
|
SCS-016 — Outside Corner Detail Drawing |
DWG
|
PDF
|
SCS-017 — Compartmentalization Detail Drawing |
DWG
|
PDF
|
SCS-018-A — Base of Wall (Option A) Detail Drawing |
DWG
|
PDF
|
SCS-018-B — Base of Wall (Option B) Detail Drawing |
DWG
|
PDF
|
SCS-019-A — Vertical Wall Construction Joint (Option A) Detail Drawing |
DWG
|
PDF
|
SCS-019-B — Vertical Wall Construction Joint (Option B) Detail Drawing |
DWG
|
PDF
|
SCS-021 — Custom Tieback Box Cover Detail Drawing |
DWG
|
PDF
|
SCS-022 — Wall to Intermediate Slab Tie-in Detail Drawing |
DWG
|
PDF
|
Technical Letters
Technical Bulletin
Product Name | |
Best Practices - Sealing PREPRUFE® Seams Using Vee Rollers Technical Bulletin |
PDF
|
Produits
- Product Name
- Description
- Key Benefits
- Applications Type
PREPRUFE® 200 is a composite sheet membrane comprised of a robust HDPE film, an aggressive pressure-sensitive adhesive and a weather resistant coating. Using patented Advanced Bond Technology, PREPRUFE® 200 Membrane provides a continuous seal that resists water ingress and migration between the membrane and the structure.
- Prevents water migration
- Fast and easy installation
- Avoids delays
- Excellent vapor barrier
It can be applied either horizontally to smooth prepared concrete, well-rolled and compacted sand or compacted crushed stone blinding; or vertically to permanent formwork or adjoining structures.
PREPRUFE®250 pre-applied waterproofing membrane is a unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating.
- Forms a continuous adhesive bond to concrete poured against it
- Specifically designed to prevent water migration
- Continuous bond to poured concrete means PREPRUFE® 250 membrane is unaffected by ground settlement
PREPRUFE® 250 is intended for low hydrostatic pressure or intermittent water conditions. Applications include construction such as garages, plant rooms and utility grade basements.
PREPRUFE® 275 membrane is a composite sheet comprised of an HDPE film, an aggressive pressure sensitive adhesive and a weather resistant protective coating.
- Durable system designed specifically to withstand the force of shotcrete placement.
- The unique continuous and integral bond to the structure, is specifically designed to reduce lateral water migration between the membrane and the shotcrete.
PREPRUFE® 300R Plus & 160R Plus membranes are unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive and weather resistant protective coating.
- Forms a unique continuous adhesive bond
- Provides a barrier to water, moisture and gas
- Easy roll/kick out installation
- Release liner free
- PREPRUFE® 300R Plus membranes can be applied horizontally to smooth prepared concrete, carton forms or well rolled and compacted earth or crushed stone substrate
- PREPRUFE® 300R Plus or 160R Plus membranes can be applied vertically to permanent formwork or adjoining structures
PREPRUFE® 300R Plus LT & 160R Plus LT pre applied waterproofing membranes are unique composite sheets comprised of a thick HDPE film, pressure sensitive adhesive, and weather resistant protective coating.
- The unique continuous adhesive bond to concrete poured against it prevents water migration and makes it unaffected by ground settlement beneath slabs.
- Designed with fully adhered adhesive to adhesive watertight ZipLap™ seams and easy to execute detailing.
- Provides a barrier to water, moisture and gas physically isolating the structure from the surrounding substrate.
- PREPRUFE® 300R Plus LT can be applied horizontally to smooth prepared concrete, carton forms or well rolled and compacted earth or crushed stone substrate
- PREPRUFE® 300R Plus LT or 160R Plus LT can be applied vertically to permanent formwork or adjoining structures
PREPRUFE® 800PA is a cold-applied, self-adhesive waterproofing membrane, composed of a reinforced cross-laminated HDPE film, and a synthetic non-bituminous adhesive. PREPRUFE® 800PA incorporates the PREPRUFE® Advanced Bond Technology™.
- Non-bituminous
- Adhesion
- Productivity
- Fully bonded
- Elastomeric
- Superior performance
- Water and vapor barrier
- Gas resistant
- Basement walls of all basement grades to BS 8102: 2009
- Below-ground car parks
- Underground RC reservoirs and tanks
- Industrial plants
- Radon and methane gas protection
- Protection from water, damp and gas of critical substructures
PREPRUFE® 800XP foundation waterproofing composite is a two-in-one system featuring a waterproofing membrane with a unique built-in protective layer that eliminates the time-consuming process of installing protection course. This flexible yet highly durable system significantly reduces labor time while minimizing installed costs.
- Tough – durable, resilient and unaffected by almost all backfill
- Aggressive Adhesion – Synthetic, non-asphaltic adhesive for aggressive adhesion and peel resistance to concrete.
- Fully Bonded – Creates a watertight seal, especially when installed with PREPRUFE® 300R Plus or PREPRUFE® 160R Plus pre-applied membranes, to form a complete, below-grade waterproofing system.
Preprufe® SCS is a unique blindside waterproofing system specifically developed to provide a high performance waterproofing solution for shotcrete foundation walls.
- Durable system designed specifically to withstand the force of shotcrete placement
- Post-injected grout fills and seals, providing ultimate waterproofing protection
- Aggressive bond to shotcrete resists lateral water migration
- Excellent resistance to hydrostatic pressure
Shotcrete foundation walls
Accessoires
- Accessory Name
- Description
- Key Benefits
- Applications Type
PREPRUFE® Detail Tape is a specially formulated, two-sided, highly aggressive tape. It is a 2 in (50 mm) wide x 50 ft (15 m) long self-adhesive tape with a release liner.
- Detailing accessory to the PREPRUFE® and PREPRUFE® SCS Systems
- Adhering Hydroduct® drainage composites and insulation boards to waterproofing membranes
Preprufe® Grout EG 75 is a high performance, solvent free, impermeable epoxy grout for maintaining continuity of Preprufe® waterproofing systems at pile heads and similar structural penetrations. The product comprises of a base epoxy resin, an epoxy hardener and graded mineral aggregates. The three components are supplied pre-measured for easy on site mixing at the correct ratio.
- Water resistant adhesion to all products in the Preprufe sheet waterproofing system
- Impermeable
- High bond to substrate
- Rapid strength gain
- High compressive, flexural and tensile strengths
- Waterproofing of pileheads and pilecaps
- Waterproofing of structural penetrations through Preprufe® waterproofing systems
- Recommended thickness range 1/2" (13mm) - 3" (75 mm)
A caulk-applied hydro-swelling sealant designed as a water stop for use around penetrations and in both horizontal and vertical construction joints.
- Solvent free
- >200% expansion
- Can be applied to damp surfaces
- Strong adhesion
- Ease of application
- As a water stop around pipe penetrations, rebar, utility conduits and other penetrations
- Horizontal and vertical construction joints in concrete surfaces
- As a detailing accessory to the Preprufe® Waterproofing System
Preprufe® Tape and Preprufe® CJ Tape are specially formulated two sided, reinforced pressure-sensitive tapes. These tapes are constructed with a highly aggressive adhesive which is designed to adhere to penetrations, protrusions and GCP waterproofing membranes.
- Detail areas including end laps, penetrations and repairs to Preprufe waterproofing systems
- Construction joints
The Preprufe® Tieback Cover is a specially designed, two-part cover used to maintain waterproofing integrity at soil retention tieback heads. The Preprufe® Tieback Cover consists of a base and cover, and is assembled on site to provide a simple and quick waterproofing detailing aid used with the Preprufe® system.
- Prevents water migration
- Fully-adhered watertight laps using Preprufe Tape
- Simple and quick to install
- Easy to inspect
The Preprufe Tieback Cover can be installed over cable and rod type tieback heads.
Protéger votre structure avec une membrane d’étanchéité éprouvée
Composé d’un robuste film HDPE, d'un adhésif sensible à la pression et d'une couche de protection, Preprufe® formes un lien robuste, permanent et agressif avec la dalle de béton. Les produits Preprufe® sont spécifiquement conçus pour des applications critiques et incluent la technologie Advanced Bond Technology™ afin de s’assurer que les produits sont entièrement collés et qu'ils offrent une excellente performance à long terme. Cette technologie permet à Preprufe® de former un joint continu et ininterrompu avec le béton pendant toute la durée de vie du bâtiment.
Une solution d'imperméabilisation éprouvée et fiable pour des applications critiques
Le système d'étanchéité Preprufe® Advanced Bond Technology™ crée un lien uniforme, intégral et permanent avec le béton. Scellé ainsi, il empêche la migration latérale de l’eau à l'intérieur et autour de la structure, en plus d'offrir des performances supérieures pendant la durée de vie de la structure. Dans le cas d’un bris ou d'une mauvaise installation, cette membrane entièrement adhérente veille à ce que l’eau sous pression hydrostatique ne puisse pas migrer entre la membrane et le béton, limitant ainsi le risque de défaillance catastrophique du système d’imperméabilisation. Des tests indépendants et 25 ans d'expérience ont démontré que Preprufe® peut résister à la migration latérale de l’eau, même sous les très fortes pressions rencontrées à 70 mètres et plus, sous la nappe phréatique. Pour cette raison, les systèmes Preprufe® ont fait leurs preuves dans le cadre d'applications critiques partout dans le monde.
Installation facile pour les entrepreneurs qui permet d'assurer la performance de la membrane et d’accélérer le rythme des travaux
De nombreux systèmes présentement sur le marché nécessitent l’utilisation de soudure ou de recouvrements fixés mécaniquement. Ces exigences d’installation nécessitent un installateur qualifié, ce qui présente des risques pour l’installation et nécessite du temps, des efforts et de l'expertise. Ces méthodes nécessitent une grande équipe et des équipements spécialisés, en plus de créer un potentiel pour des conditions de site dangereuses et des odeurs désagréables. En plus des défis logistiques, ces mécanismes ont tendance à être capricieux; des défis typiques de chantier tels que la poussière et l’humidité peuvent facilement entraîner des chevauchements et des détails réalisés de manière incorrecte, ce qui peut entraîner des conséquences à long terme coûteuses.
En revanche, le Preprufe® Plus peut être appliqué avec une équipe minimal et ne nécessite aucun équipement spécial pour l’installation. L’installation est simple : une conception « kick-out » permet aux travailleurs de dérouler une feuille en quelques secondes. Un joint adhésif double ZipLap™ permet aux feuilles de se lier facilement l'une à l'autre et l’adhésif est conçu pour résister aux conditions de chantier nuisibles typiques, comme la poussière, les débris et l’humidité.
Imperméabilisation exceptionnelle
Avec des applications sur des méga-projets comme le Alaskan Viaduct, le plus grand tunnel foré au monde, Preprufe® a fait ses preuves partout dans le monde dans des applications critiques. Au cours des 25 dernières années, les constructeurs ont installé plus de 650 millions de pieds carrés de Preprufe® dans des applications au-dessous du niveau du sol; il n'existe guère de marque plus fiable en étanchéité. Pour plus d’informations sur la manière dont Preprufe® peut contribuer à la réussite de votre projet, communiquez avec GCP dès aujourd'hui.
Applications
PREPRUFE® waterproofing systems are ideal for a wide range of applications, including:
- Airports
- Colleges and universities
- Commercial/retail
- Infrastructure
- Mixed use buildings
- Museums
- Public transit
- Stadiums
System features:
- 25+ year track record
- Flexible yet highly durable films
- Easy-to-install detailing
- Resistant to water migration (Independently tested at 70 meters of hydrostatic head pressure)
- Red List Free
In addition to a comprehensive suite of pre- and post-applied waterproofing membranes, GCP manufactures a range of accessories that work with PREPRUFE® waterproofing systems.
Contact a waterproofing expert today. >

Références de l’entrepreneur
Trouver les instructions d’utilisation, détails d’installation et des dessins détaillés.
Localisateur de distributeur
Vous cherchez un distributeur qui fournit le pare-air, clignotant, barrières résistif météo, sous-couches de toiture, étanchéité, matériel d’injection ou du plancher ?

Garantie du produit
Cliquez sur le login pour accéder au site avec votre nom d'utilisateur et mot de passe. Veuillez ajouter GCPAT \ (y compris la barre oblique) devant votre nom d'utilisateur lors de la saisie du nom d'utilisateur. Si vous avez besoin d'aide, veuillez contacter Denise White au: 617 498-4555 ou Denise.I.White@gcpat.com