Atalanta Bergamasca Calcio S.p.A. gives a new pulse to the activities of the Bortolotti Centre. This project included improving the shape of the center, rebuilding the existing buildings, and building new sports and management facilities.
The sports center is located next to Ciserano and Verdellino, found in the Zingonia region, at the center of the low Bergamasca plain, halfway between Bergamo and Treviglio. Inside, one part of the building was dedicated to offices, one part to locker rooms, a gymnasium, a sauna, and shops, and a third to a reception area with a cafeteria and relaxation rooms.
The stadium construction project covers a large area of over 2,800 m2, of which 1,400 m2 is underground and the remaining 1,400 m2 on three above ground floors, giving 4,970 m3 underground and 4,300 m3 above ground.
High water table requires careful planning
Stadium construction was centered in an area where the level of the water table was high, which involved both careful planning and organization of the site. Water with a high-variable degree of hardness - and also containing salts and other particularly aggressive chemical products - may come in contact with stadium construction; this requires the use of an advanced waterproofing system.
The spatial division of the structure is highly-complex and articulated. The basement was intended for “dedicated” spaces in which a dry and healthy environment was essential. This included medical rooms, changing rooms, gymnasium, kitchens, cafeteria, bar, pantry, offices, the print room and meeting rooms. This extensive use of the basement was made possible by using a stable and effective waterproofing system resistant to water, and humidity.
A complete waterproofing solution
A complete waterproofing system comprised of Preprufe® pre-applied membrane, Bituthene® self-adhesive membrane and Hydroduct® 200 drainage composite was chosen to protect this stadium.
Preprufe® membrane consists of a robust high-density polyethylene (HDPE) film which is impermeable to water, water vapor and gas and a proprietary adhesive that bonds to the concrete. Preprufe® not only protects but becomes an integral part of the structure. This sealing prevents the migration of water and moisture at the membrane and concrete interface, thereby eliminating possible infiltration of water into the structure.
Blue360sm Product Performance Advantage.
Because every project, large or small, deserves the best level of protection.
ca.gcpat.com | North America customer service: 1-877-4AD-MIX (1-877-423-6491)
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Suite 450, Alpharetta, GA 30009, USA
GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the Canada. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2022-04-27