OPTEC® EC-315 is a liquid integral efflorescence controlling admixture for use in concrete masonry units, where zero or low slump concrete is required. OPTEC® EC-315 restricts the migration of water while it reduces efflorescence, maintains color intensity, and provides dirt and stain resistance. In addition OPTEC® EC-315 increases density, producing a unit with higher compressive strengths, lower absorption, and better overall appearance.
OPTEC® EC-315 chemically reacts with cement, filling the pores of the concrete with water insoluble hydrophobic products. This produces a water-repelling effect by greatly reducing absorption of the capillary pores.
Since OPTEC® EC-315 is throughout the masonry unit, the migration of water to the surface from within is restricted. This aids in strength development and reduces the potential for efflorescence. OPTEC® EC-315 is non-chloride and non-corrosive.
The recommended addition rate of OPTEC® EC-315 is 260-650 mL /100 kg (4-10 fl oz/100 lbs) of cementitious material. However, prior testing is needed to establish the most effective dosage rate.
The recommended point of admixture introduction will vary with equipment and mixing procedure; however, OPTEC® EC-315 should not be dispensed onto dry cementitious materials. Your GCP representative will assist in determining the optimum point of admixture addition. The minimum temperature for application is 1°C (34 °F).
A complete line of admixture dispensing equipment is available.
OPTEC® EC-315 is available in drums, returnable totes and in bulk. Product weight is 1.02 kg/L (8.5 lbs/gal).
All precautions defined on the SDS (Safety Data Sheet) for OPTEC® EC-315 admixture must be followed.
Protect OPTEC® EC-315 from direct sunlight and freezing. OPTEC® EC-315 has a shelf life of 1 year.
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
OPTEC is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Suite 475, Alpharetta, GA 30009, USA
GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the Canada. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2024-06-21
https://ca.gcpat.com/en/solutions/products/optec-ec-315